On Gentrification in Los Angeles

The poor condition and high crime rate have caused nearly unanimous support from the residents for some form of government intervention in the area, Hough the extremity of the proposed redevelopment has community members uneasy about their future. In an article titled America's Worst Housing Project is Being Gentrified by Mike Pearl via internet-based fringe media outlet Vice the author argues that gentrification's benefits Only extend to those who can afford the rent hikes that inevitably accompany redevelopment.As Pearl sees it, â€Å"history teaches us that when your dilapidated housing project gets revalidated, you do not get to stay unless you stop being very poor†. The City of Los Angels currently maintains a required ratio of one subsidized housing unit for each that is rented at market value, however the prominent real estate blob Curbed LA questions this statement, asserting that â€Å"This isn't the first effort to tear down and fancily a crumbling housing project, but it is the first time such a large project has been undertaken without kicking all of the current residents out first†.With understandable skepticism many residents of Jordan Downs believe that the gentrification may drive the low income inhabitants out of the area with no alternative options for housing. This was the case in Chicago Cabin Green district, in which 80% of low income residents were driven out by more affluent residents willing to pay high prices for the land. Jordan Downs native Juanita Sims, a four decade long resident of the projects, commented â€Å"I'm not afraid to move, but what my fear really is is: Where†?The Housing Authority for the City of Los Angels (HACK) attempted to qualm the fears of Jordan Downs occupants by stating that all residents â€Å"in good standing' would be allowed to remain in their units until the day that hey were relocated to an apartment in the new buildings. The extremely vague wording of this decree did little to plac ate the uneasy residents, as the term â€Å"in good standing† places a huge amount of discretion in the hands of the housing authority.Community outreach group SHIELDS for Families has been on site in Jordan Downs recently to prevent abusive renting policies. In their words, the city has begun â€Å"a new enforcement of old rules†, recently evicting several people for violations that they had been committing for the entire span of their occupancy at the complex. Things that previously had gone unnoticed such as bad housekeeping, or violations of the no pet policy have recently landed several people with evictions.LA Times author Jessica Garrison commented in her article Bumptious Makeover Planned for Old Housing Project â€Å"It will be an enormous challenge, with success likely to be measured in tiny increments,† further noting that â€Å"only 47% of adults at Jordan reported any wages to the housing authority last year†. Though the challenges of this pr oject are numerous, however the benefits to the community may be equally great in magnitude, provided that students are given fair opportunities to remain in the area at affordable prices.Between the initial stages of planning the project Jordan Downs has seen a 53% drop in violent crime and zero homicides in the past 18 months. To further assist in transitioning from dilapidated urban decay to the â€Å"Vibrant Urban Village† that the redevelopment's Faceable page promotes, the LA Housing Authority has begun funding community growth by hosting classes at the Jordan Downs Community Center.These courses include computer skills, financing parenting and even high school equivalency adult education. Career counseling has also been available to residents like Cynthia Gill who told Nap's All Things Considered that [after receiving career counseling] â€Å"When go to an interview, know how to present myself, how – what to say, what questions to ask and to know to ask questio ns and how to dress and how to carry you resell†.The Los Angels Housing Authority bolstering of community development funds in recent months has assisted the redevelopments goal to gain favor from the residents, however many outside parties remain staunchly opposed to the gentrification. The comment section on Vice's article generated an outcry of opposition to the redevelopment. One commenter named James Knowles asserted that â€Å"LA. is going to lie to the residents of Jordan Downs just like every other city lied to its residents with promises of a better life.More or less it will go like this†¦ ‘Here is a section 8 voucher now, go find somewhere to live'†. Knowles has good reasons to suspect that this outcome is a possibility. Atlanta has had many similar problems with gentrification in recent years. In a publication by notable sociology professors Leslie Williams Reid and Robert M. Dolman, the authors observe that â€Å"Without question, rising property values have displaced older, long-term black residents as middle- and upper-income whites bid up property values [in Atlanta)†.The professors then refer to the Atlanta neighborhoods Kirkwood, East Lake and East Atlanta which are widely considered one of the clearest examples of gentrification in American history. The change in property value and economic status of the people these neighborhoods is believed to be caused in part by the aging local population (allowing for an abundance of vacancies), lose proximity to downtown, opening opportunities for new development and the desirability of the surrounding metropolitan area. Jordan Downs has each of these factors in common with Atlanta.At this point it is too late for the residents of the Jordan Downs Housing projects to Stop the redevelopment from happening the developer has applied to the federal government for a $30 Million loan for seed money to fund the project, and the HACK has approved the plans to begin construction. D espite the best efforts of people on all sides of the issue to reverent massive gentrification from consuming the area, it is impossible to ignore the tell tale signs that the poor residents will be shunned and driven out as the desire for economic growth continues.

Africa Hunger Essay

Today, i am happy to come here and tell you sth about Africa Hunger. First, i have a small question for you :† have you ever had nothing in your stomach for three days? Maybe none of you here have suffer it but in sub-saharan Africa, there are a lot of people died everyday due to starvation. In this presentation, i will tell you five things you may not know about hunger in Africa. Hunger in Africa has become a huge issue over the years. There are billions of adults and children starving. The first of five factors you may not know about Africa Hunger is Climate changes and bad weather significantly affect hunger in Africa. It push more and more people into hunger. According to Climate changes and Hunger, FAO, 2009; By 2050, climate change and bad weather will have pushed another 24 millions children into hunger. Almost half of these children will live in sub-saharan Africa. Why FAO can point out this conculsion, they have analized value of the number of hungry people from 2001-2009. this climate changes factor has create the following factor. Factor number 2 is rising food prices contributes to hunger in Africa. It is affected by climate changes and economic issue. However this problem can be solved since there are a lot of foundations for victims of starvation. However Factor number 3 showing that 2 factor above has crushed this part of the world is Africa accounts for 1 quater of the hungry population. From this chart you can see that there are 102 billion people in hunger all around the world and about 642 millions in Asia – Pacific. Sub- saharan Africa hvae reach 265 millions which mean 1 quarter of the world’s hungry population. The following factor will show us how terrible hunger is? Factor number 4: Hunger kills more people than AIDS in Africa. FAO has shown that 14,6 million African died because of AIDS but it is up to 42 million hungry deaths in the near East and North Africa. Factor number 5 relating to money have point out that it only take $0,25 to feed a child in Africa. You can provide a child with all of the vitamins and nutrients, he or she need to grow up healthy with only 5200 VN Ä  per day. Food is a humand right but there are more hungry people now than at any time in history. We can fix it. By this preresentation, i just want to send you a message â€Å" plz, don’t waste your food even a piece of bread†.

An Effective Manager of Home Depot Essay

According to Robbins and Coulter (2005), effective managers all over the world acknowledge the role that strategic management plays in their organization’s performance. Moreover, Drucker (2004) said that the gauge of an effective manager or executive is the ability to get the right things done. This typically entails doing what other individuals have ignored in addition to avoiding what is unproductive. Imagination, intelligence, and knowledge might all be wasted in an executive job without the attained habits of mind that form them into results. I believe that Bob Nardelli is exhibiting these characteristics and management style of an effective manager as he leads Home Depot to become continually successful in its operations. As he triumphed over various problems in managing the company and a s a result oh his managerial strategy, Home Depot is now has now increased sales by 60 percent and earnings per share by 105 percent (Business Week Online, 2006). During his first day as CEO at Home Depot in the year 2000, the company has various problems to deal with, some of which, were as follows: it lacked the necessary infrastructure to send even a companywide electronic mail, Home Depot stores were already run-down and was being known as a store with poor customer service, the stores’ shipments were logged using pencil and clipboard, and Home Depot stores did not have automated inventory systems (Sellers, 2001). Being a visionary leader that he is, Nardelli believed that better processes must lead to better quality ad higher profits for Home Depot. He employed strategic management in planning to improve the company. As asserted by Robbins and Coulter (2005), the prevailing belief in management theory and society on the whole is that managers are completely responsible or accountable for an organization’s success or failure. However, Nardelli demonstrated that aside from the fact that much of an organization’s success or failure is because of external forces outside of the manager’s control, the manager has a big responsibility in making decisions for the success of the organization. A major component of Nardelli’s far-reaching move to reform Home Depot, which is considered to be the world’s third-largest retailer, into a more centralized company, include importing people, ideas, and platitudes from the military (Business Week Online, 2006). This might be an unwelcome concept in management circles; however, Nardelli couldn’t care less. He believes that it is a vital aspect of his strategy to lead in a cumbersome 2,048-store chain and get ready for its next leg of growth (Business Week Online, 2006). In an uncertain and dynamic environment, real world organizations employ strategic decision-making when making decisions offers managers with a comprehensive and systematic means for taking into consideration the external environment, concentrating on an organization’s strength, reducing weaknesses, and recognizing opportunities in which an organization can have a competitive edge (Shafritz & Hyde, 2004). As maintained by Holstein (2004), the Nardelli decision-making model might help create a pattern for other CEOs who have been extremely frustrated and disillusioned by their lack of success in harnessing technology. In transforming Home Depot to what it is now, Nardelli increased information technology spending by almost 20 percent (Sellers, 2001). Then in year 2003 Nardelli spent a total of $400 million on inventory shipping and tracking systems (Sellers, 2001). Aside from these, Nardelli also spent around $250 million refurbishing Home Depot stores (Pellet, 2001). This included the installation of self-checkout systems in 800 stores to lessen customer lines and ease up salespeople. This also included the establishment of two-way cordless scanners, which enabled products to be price-scanned in the shopping cart, in this manner shortening lines. Being an effective manager, he also paid attention to motivating the organization’s workers. Armstrong (2002) said that in providing rewards to employees, supervisors and managers should identify what rewards will succeed for specific employees at any given time. Even though supervisors and managers might not be able to have power over certain rewards like benefits or wages, they have the liberty to give out rewards like recognition and praise. In Home Depot, Nardelli instituted innovations in providing rewards and in human resource management. First, he substituted 157 different employee evaluation forms with two (Pellet, 2001). In addition, coworkers, above and beneath them, rated aalaried personnel from the CEO down and salaries were derived from the scores. Then during a period when Home Depot was planning to hire approximately 100,000 new employees, Nardelli did not automatically fire those employees with poor scores (Pellet, 2001). Nardelli first requested for the advice of others and informed underperformers precisely what they were doing wrong. This way, Nardelli showed that it is important for a manager to vigorously seek opposing opinions and inquire regarding the basis for those opinions before selecting a course of action is being stressed, instead of acting on the basis of tacit or pre-arranged agreement. Necessarily, this needs constantly listening with real curiosity so as to promote development of different opinions and supporting rationales, instead of merely setting forth suggestions and working to make agreement around them (Drucker, 2004). Furthermore, Nardelli seemed to follow step two in Peter Drucker’s model (204) that executives require both themselves and their staff or subordinates what they contribute presently to the organization and what they could contribute to the organization in the future. In Home Depot, Nardelli asserted that in spite of whether a person’s belief of what he/she now contributes, or could contribute, equals his/her manager’s belief, emphasizing and bringing out the importance of everybody’s role as a contributor is necessary to the organization’s general effectiveness. In initiating change in Home Depot, Nardelli showed that everybody in the organization makes decisions; nevertheless, decision-making is specifically vital in a manager’s job. I think that he followed what Robbins and Coulter (2005) said that decision-making is part of all four managerial functions – planning, organizing, leading, controlling, and that decision-making is synonymous with managing. Holstein (2004) has written that when Nardelli joined Home Depot, the challenge of improving the company’s supply chain and logistics became apparent because the company is way behind other stores in these areas. Hence, he established a model called â€Å"full truckload to the store,† which means that the more you brought, the more it would oblige you to sell, since you get kind of jammed (Holstein, 2004). In terms of information technology, at Home Depot, Nardelli has established a system of checks and balances (Sellers, 2001). The manner is which Nardelli is managing the technological transformation is attracting attention and interest from other executives and managers. Sellers (2001) said that Nardelli has borrowed from the CE playbook to establish a system of checks and balances on how technology is managed, and Nardelli has likewise incorporated technology decisions deeply into his business strategy in runring and managing Home Depot. Furthermore, Nardelli likewise employed building deeper relationships with fewer vendors. As stated earlier, the Nardelli decision-making model might possibly help create a pattern for other CEOs who have been exceedingly frustrated and disillusioned by their lack of success in utilizing technology. In conclusion, in transforming Home Depot to become the earning company that it is now, I believe that Nardelli demonstrated that leadership is the capability to influence people or groups toward the accomplishment of goals. As a process, Nardelli showed that leadership forms the goals of an organization or group, inspires behavior toward the attainment of those goals, and helps characterize organizational or group culture; hence, it is fundamentally a process of influence. # References Armstrong, M. (2002). Employee Reward (3rd Edition), CIPD: London. Drucker, Peter. â€Å"What Makes an Effective Executive,† Harvard Business Review, Vol. 82, No. 6, June 2004. Holstein, W. (2004). â€Å"The Depot goes digital: how CEO Bob Nardelli is managing a $2 billion technology transformation,† The Chief Executive. Pellet, J. (2001). â€Å"Mr. Fix-It Steps In,† Chief Executive. â€Å"Renovating Home Depot. † (2006). Business Week Online. Robbins, S. , & M. Coulter. (2005). Management, (8th ed. ). Prentice Hall. Sellers, P. (2001). â€Å"Exit the Builder, Enter the Repairman: Home Depot’s Arthur Blank Is Out. New CEO Bob Nardelli Is In. His Job: To Tackle the Company’s Renovation after Two Decades of Nonstop Expansion,† Fortune. Shafritz, J. M. & A. Hyde. (2004). Classics of Public Administration, 5th ed. Belmont , CA : Wadsworth/Thompson

To complete all the rest parts Essay Example | Topics and Well Written Essays - 2000 words

To complete all the rest parts - Essay Example n numbers in the opening and closing ceremonies, the manpower costs that were needed to be defrayed, lodging and subsistence of the athletes and other participants, and the maintenance of the Olympic facilities. The data showed there was a sudden increase in the GDP rate for the latter half of 2012, which appeared to suggest that the Olympics, which took place in the third quarter, and the activities leading to it, indeed brought about the economic growth expected in holding a mega-event of that size. Closer inspection showed, however, that the growth of gross fixed capital formation appeared to have come more from government spending rather than private business, suggesting that unless the private sector picks up the pace in pushing for greater production, the sudden increase in GDP will not be sustainable, and long-term benefits due to the Olympics may not be forthcoming. Mega-events attract a global audience, and therefore are capable of drawing international attention and spending power. The World’s Fair, the World Cups of the different sports, and the Olympic Games are itinerant events that regularly hold venues at different places, depending upon the outcome of a bidding process (Varrel & Kennedy, 2011). Necessarily, the hosting of mega-events require that the host city incur a huge amount in expenses and investment in infrastructure and facilities. Despite the immense honour of hosting the event, the sheer financial burden would be enough for potential bidders to stay away, unless a greater return is expected. A great part of the allure of hosting such events is the promise of an economic windfall with a substantial urban makeover (Chalkley & Essex, 1998). This is in addition to the prestige derived and the international recognition of the host country as a major player of global importance (Van der Westhuizen & Black, 2004). In the case of the Olympic Games, the benefits are normally in the form of the construction of special structures where the

Advantages of e-CRM systems Coursework Example | Topics and Well Written Essays - 750 words

Advantages of e-CRM systems - Coursework Example This involves first seeking the customer’s permission and providing them with an incentive, before targeting them with the organization’s given marketing message. E-CRM systems make it easy for organizations like Our Town Photography to engage in multiple relationships with multiple customers through the use of different opt-in and opt-out tools such as checking a box in an online form. E-CRM systems are essentially designed for this new form of marketing. Permission marketing ensures that the company only concentrates its marketing on customers who are interested. This leads to the second advantage of e-CRM systems: effective targeting. E-CRM systems keep records of those who have visited a web site and expressed an interest in the products or services offered by registering their name and other details. By sending marketing messages to this category of web visitors, Our Town Photography will receive higher response rates from its target customers. With the e-CRM tech nology, the company could further tailor its messages to customer micro-segments. With effective targeting, the overall cost of reaching customers also goes down. Firstly, it is cheaper to use electronic communication methods than physical ones. Secondly, with effective targeting the number of mail-outs is reduced ... These systems also support active information gathering from customers through tools such as online forums and communities, new product prototype evaluations and even customer-led innovations. List the specific data you would to store in your system Name Address Birth dates Purchase History Product or service recommendations made Gifts sent and received Anniversaries Hobbies and interests Gender Marital Status Post-sales service and/or product rating Research at least two e-CRM systems that are available and do a compare contrast between the two systems. List the advantages and disadvantages of each the system and create a side by side comparison matrix. Table 1: SugarCRM versus Microsoft Dynamics CRM Feature SugarCRM Corporate Microsoft Dynamics CRM Deployment On-premise or cloud-based On-premise and cloud-based Trial period 7 days 30 days Cost US$ 45/user/month US$ 44/user/month Databases -Client can opt to use SugarCRM datacenter or Client datacenter or third party datacenter -Off ers 30GB free -Client can use own datacenter or Microsoft Cloud datacenter -Offers 5GB free, client pays for extra storage Employee applications and channels -Unlimited customization options / based on Open Source standards -Proprietary system thus customization limited by vendor -Massive ecosystem of extensions developed by Open Source community found at SugarExchange for over 200 commercial extensions and SugarForge.org for over 800 free extensions -Seamless integration to Microsoft products -Integration with Outlook and Microsoft ERP is especially very appealing to small and medium businesses. -Full sales, marketing and support automation -Full sales, marketing and support automation -Email integration, reporting, team selling, collaboration tools, advanced security, workflow

Human rights Essay Example | Topics and Well Written Essays - 1250 words

Human rights - Essay Example You are contacted by Corinne, who is a nurse who enjoys eating chocolate flavoured cereal. She has heard about the proposed legislation and is worried. If the Bill becomes law, and her employers try to stop her from eating coco pops, will she be able to challenge this in the courts? If so, how would the courts approach her claim. If the proposed Bill becomes law and the employees of Corinne stop her from eating coco pops, then Corrine can challenge this in the courts. Under the Human Rights Act, 1998 of United Kingdom, Corinne can appeal in UK courts against the Bill. The Act is meant to provide remedy to the aggrieved parties in the UK courts itself without their having to go to the European Court of Human Rights in Strasbourg Germany. European court of Human Rights is the supra-national court of last resort for human rights. On the Appeal of Corinne against the new law in the UK courts, the UK courts will interpret the new law to check whether it is compatible with the articles of the European Human Rights Convention or not. The Human Rights Act of 1998 makes it unlawful for any public body to act in a way which is incompatible with the European Human rights convention, unless such an incompatible act is supported by an Act of the Parliament (Ovey, Clare; White, Robin C. A. ,2006). Now the proposed â€Å"healthy breakfast† bill proposes that all the civil servants, NHS staff and police officers will have to eat unsweetened porridge for breakfast. This proposal is based on a research that shows that consumption of too much sugar early in the morning causes people to lose concentration later in the day. The bill further proposes that failure to do so will be a criminal offence. Section 31 of the bill authorizes random blood sugar tests and home inspection. This proposed bill, if passed into an act, will be a blatant violation of the European Human Rights Convention. Article 8 of the European Convention on Human

Stem cell research and should it be federally funded Paper

Stem cell and should it be federally funded - Research Paper Example The present enthusiasm over prospective stem cell-produced remedies radiates from the new innovations of genetic biology. Though one cannot forecast the results from basic research, there is enough information available to suggest that a good deal of this enthusiasm is justified. This enthusiasm is not shared by those of the religious right. This faction is opposed to embryonic stem cell research which they claim as immoral and characterize as devaluing human life, much the same as does abortion, drawing a link between the two. This discussion will provide a brief overview of stem cell research and its benefits to society, the debate surrounding the issue and the arguments for continued research. Embryonic stem cells possess the ability to restore defective or damaged tissues which would heal or regenerate organs which have been adversely affected by a degenerative disease. Cell therapy has the very real potential to provide new cures for diabetes, cancer, kidney disease, macular deg eneration, multiple sclerosis and many other kinds of diseases. Cell therapy has also demonstrated a great potential to help repair and regenerate spinal cord injuries which would help paralyzed patients recapture lost body functions. The possibilities are limitless including greatly advancing the human lifespan because aging organs could be replenished. â€Å"We may even have the ability one day to grow our own organs for transplantation from our own stem cells, eliminating the danger of organ rejection.† 1 The three main objectives given for pursuing stem cell research are obtaining vital scientific information about embryonic development; curing incapacitating ailments and for testing new drugs instead of having to use animals. The scientific techniques for obtaining stem cells could lead to unparalleled advances and even cures for these and other ailments. It has been substantiated from animal research that stem cells can be differentiated into cells that will behave appr opriately in their transplanted location. For example, the transplantation of stem cells following treatments for cancer has found much success for many years. There are numerous potential sources. The first is bone marrow stem cells. This type of stem cell is probably the most recognized of the stem cells. It has been used routinely to treat a variety of blood and bone marrow diseases, blood cancers and immune disorders. Leukemia is the most recognized disease that has been treated with a bone marrow transplant. New evidence suggests that bone marrow stem cells may be able to differentiate (the process by which an unspecialized cell acquires the features of a specialized cell) into cells that make up tissues outside of the blood such as liver and muscle. 2 The second type of stem cell is the adult stem cell. An adult stem cell is thought to be an undifferentiated cell, found among differentiated cells in tissues or organs. These cells can renew themselves and can differentiate to b ecome some or all of the major specialized cells types in the tissue and muscle it resides in. The primary function of this type of stem cell is to maintain and repair the tissue in which they reside. Because there are a very limited number of adult stem cells in each tissue coupled with their limited capacity to divide; making generation of large quantities of these cells is

As a senior partner in a marketing consultancy,short business report Assignment

As a senior partner in a marketing consultancy,short business report advising this client - Assignment Example The  troupe  of non-marketing  will have an influence on the marketing executives of the company and in their victory  to maintain good and long term  relationships  with old and new customers. The market environment for an organization or  business  is consist of the  macro environment  that includes external issues of the company or business like political, social, legal aspect with nation and local market and in other hand the  micro environment  which includes the internal issues of company like strength, weakness and opportunities of the company or business which influence in running an organization and its functional departments like finance, production, marketing etc. It will assist the Samsung Company to determine the external and internal forces that influence the company’s potential to fulfill the desire needs of their customers. The Samsung company will able to know that how to change their decisions regarding the economic factors and demographic, so they can implement better marketing strategy to engage more their customers. It also aids the company to analyze the current trend of the market and the requirement of the population of the market via technological and other natural’s factors. Through the help of marketing environment the Samsung company will able to deal with political and legal factors of nations. The marketing environment can be done through with the help of PESTLE analysis and SWOT analysis. PESTLE analysis aids the Samsung to know about of external force which may influence on their work, whereas SWOT analysis will aids to indentify the internal factors and capacity of the Samsung Company. Through this analysis the Samsung Company will capable to know the political, economical, social, technological, legal and environmental forces, these are external factors. In other hand, strength,

Intrinsic vs. Extrinsic Motivation Research Paper

Intrinsic vs. Extrinsic Motivation - Research Paper Example perform at the best possible level. This motivation could be innate or derived from external forces/functions, referred to as intrinsic motivation and extrinsic motivation, respectively. Level and/or intensity of these two types of motivation have an impact on individual’s commitment, interest, and ability to perform, learn and progress in all aspects of life, be it learning, working, or performing any other activity. Moreover, individuals are variably inclined towards extrinsic and intrinsic rewards. Extensive theorizing and research have pointed out that both these motivations are impacted by each other and that they either enhance or undermine impact of the other. This study explores this aspect of motivation while comparing and contrasting both types, with support derived from theories, researches and practical applications. Getting inspired by engaging in activities that produce excitement and challenge is a basic human nature and is one of the core routes towards human development (Sansone & Harackiewicz, 2000). The Cognitive Evaluation Theory explains intrinsic motivation as individual’s opinion or feeling and competence rather than an inner urge itself. Here the control and learning aspects emerge when rewards are attached to task accomplishment. The CET proposes that an individual’s intrinsic motivation is based on control and information. It proposes that if the individual’s locus of control lies outside, then intrinsic motivation is low and if it lies inside, then intrinsic motivation is high; secondly, if the individual has positive information of competence, knowledge, and/or stimulation, then intrinsic motivation is higher and vice versa (Weinberg, 2009). Traditionally, extrinsic rewards were considered as harmful because extrinsic motivation was compared with extrinsic pu nishment (Cameron & Pierce, 4). The CET theory forms the base for understanding intrinsic and extrinsic motivation as well as many arguments with respect to

Humen computing interaction Essay Example | Topics and Well Written Essays - 500 words

Humen computing interaction - Essay Example Once the user fill out the required fields and press the confirm button, their order will be confirmed directly. We want to become the best beauty lounge in the UAE through delivering the superb quality of work, exceptional customer service and the highest hygiene standards. This system will make it easier for the user to order different beauty products and other services online Moreover, using this system the users will not spend long time waiting to purchase products or try other services that increases frustrating rate and decrease the level of satisfaction. . The goals of Human computer interaction are very essential to take into account in order to keep our applications easy to use by the visitors. First of all, we can reach the effectiveness through assisting the user to achieve the task successfully such as â€Å"purchasing†. We can reach the efficiency through assisting the user to accomplish their tasks quickly. Moreover, we can’t deny the importance of the first impression from the interface since it has big effects to keep the user on the page . Usability and appeal are considered to be from the factors that provides long term satisfaction of the user Customer feedback page will allow to understand how customers are rating and using products versus competitive products. Through collecting customers recommendations, comments and rating we can study their needs in order to provide them the best products and services. Moreover, Customers’ feedback is very essential for a service provider to determine how we are important to them! In order to proceed with our project, we had to check out several websites and applications. This will help us in designing the interface of the application as well as figure out what we should add to the content of application. In addition, we had to get some real statistics to improve our application interface and the usage of this specific theme. The questionnaire was

To what extent are football violence and sectarianism linked Essay

To what extent are football violence and sectarianism linked - Essay Example In Scotland, sectarianism takes the form of political sectarian rivalry and religious sectarian rivalry which occurs between Catholics and Protestants. Sectarianism is clear in football clubs such as the fierce rivalry between Celtic football club and Rangers football club. Discussion Sectarianism According to Murray (2000), sectarianism in the Scottish football arises from offensive behaviours on the pitch. The behaviours include expression of religious, social, political and racial incitement. This aspect may occur between players of two opposing teams or among the fans. The behaviour of managers and players influences sectarianism whereby, players may receive influence from the manager who is in rivalry with the manager of the opposing team (Murray, 2000). This implies that the players will consider the opposing team as a rival, not just in the football contest, but also in the physical sense. The managers play a vital role in ensuring that there is no sectarianism among players s ince they are the role models of the players. Sectarianism may also occur during the broadcasting of a match where the commentary may use sectarian terms and incite the fans. The commentators have personal beliefs and interest. Their interests may be on one team compared to the other team; this implies that, in their commentary, they will favour one team leading to rivalry between the two teams. Sectarianism in a broad perspective may lead to threats of solemn harm, which intend to cause fear and alarm to an opposing team. To demonstrate the rivalry that one team has over the other, there is the use of implied threats such as images that depict serious harm such as bullets and threats that incite religious hatred (Murray, 2000). In the Scottish football, many deaths and assaults have occurred and have a direct link on sectarian tension within the nation. Such assaults leading to death occur before or after a football match featuring rivalry teams. Sectarianism, which is present amon g the old Firms in Scotland, occurs due to religious conflicts where some of the teams identify themselves as Catholics while the rest, which constitute a small percentage, are protestant and are from the rival team as seen in the study work of Ward & Williams (2010). Sectarianism is openly demonstrated where some clubs put up the Union flag on their pitches while some put up Irish tricolored flags. The clubs, which demonstrate Catholic faith, sign players who are Catholics. This applies to Protestants who do not allow Catholics to play for their club such as Rangers football club. Though many researchers argue that football is not the main cause of sectarianism in the Scottish football, there is evidence to show that sectarianism is until now rampant among many fans as seen in the research work of Potter & Jones (2008). Sutherland (2012) states in his research studies that politics plays a considerable role in promoting sectarianism around Scotland. This is because influential poli ticians are supporters of some teams. If an influential politician supports a club while the rival politician supports another club, it implies that the supporters of the different politicians will become rivals not just on the pitch but also outside the football pitch. Football violence This is the act where the fans or the players’ turn against each other during a football match leading to destruction of property and injuries of people.

Philippine President Benigno Simeon Essay Example for Free

Philippine President Benigno Simeon Essay Philippine President Benigno Simeon C. Aquino delivered his sixth State of the Nation Address on Monday, July 29, 2015 at the Batasang Pambansa in front of joint session of the Upper and Lower House of the country’s Legislative Branch of Government. Some students will surely give their reaction paper with the Pres. SONA as part of their assignment. The State of the Nation Address (SONA) of President Benigno S. Aquino started at around 4:00 PM (PST) and concluded after two hours and 15 minutes. The SONA 2015 is one of the highly anticipated date of the administration, as the head of state reports his accomplishments and plans for the country. During the entire SONA, the President received a total of .. rounds of applause. President Aquino started his Sixth SONA by issuing an apology that the traditional processional walks was not made because Main Topics for Discussion: Blaming the Previous Administration: President Aquino once again blamed the previous administration of former President Gloria Macapagal Arroyo mentioning the problems he inherited during his earlier days as President such as the NBN ZTE Deal, Hello Garci controversy, questionable bank accounts of Jose Pidal, Maguindanao Massacre, MWSS Bonuses and the NFA anomalies. Highlighting the Achievement of His Cabinet Members: The President applauded the members of his Cabinet for an excellent jobs as members of his Daang Matuwid program. He showcased the achievements of his administration in transportation and communications, tax/revenue, labor and wages, international relations, education, budget and finance, peace, social welfare, justice, calamity and disaster preparedness, national security, economy, infrastructure, governance and reform. Pres. Aquino lauded Commissioner Kim Henares for her tax reforms mentioning the 380 cases filed against tax evaders. The collections of the BIR also went up to P1.3 trillion and this year 2015, the BIR collection went up to P1.5 trillion. Manufacturing Unemployment: Pres. Aquino stated that there’s a 3% average growth in the manufacturing  sector from 2001-2009 but under his administration from 2010 to 2014, the manufacturing sector grew by 8%. The unemployment rate of the Philippines also dropped to 6.8% last year and considered as the lowest ever recorded in a decade. 4Ps and the Education Sector: Pres. Aquino highlighted the ‘Pantawid Pamilyang Pilipino Program’ or 4Ps which now have 4.4 million beneficiaries from 786,523 in 2010. In 2008, there were 2.9 million out of school youth in the country. In 2013, only 1.2 million out of school youth remained. On education sector, PNoy said that Alternative Learning System helped to ensure that even indigenous peoples and street children are not left behind. The requirements for the K to 12 programs – backlogs of 66,800 classrooms, 145,827 teachers, 73.9 million textbooks already provided. For TESDA program of the government, studies show that 71.9% [of TESDA graduates] found employment right away, compared to the 28.5% recorded before. Health and Social Welfare: Around 89.4 million Filipinos are already member of the Philhealth program of the national government and beginning in 2014, the poorest 40 percent of the population were treated in public hospitals for free. In social welfare, PNoy said that in the Sitio Electrification program, 25,257 sitios out of 32,441 were served. Aviation Transportation Sector: In aviation, ICAO lifted the safety concerns it imposed to the Philippines in 2013. The EU Air Safety Committee lifted the travel ban in all local carriers. For the unresolved problem on Metro Rail Transit (MRT), Aquino said plans of purchasing of new MRT train coaches. Armed Forces of the Philippines: In the Armed Forces of the Philippines (AFP) modernization, the government has plan to buy 2 more C-130. There will be additional 6 landing craft utilities and 3 C-295 medium lift transport. President Aquino mentioned the PNP’s project such as their Capability Enhancement Program of which 2,523 patrol jeeps and 577 utility vehicles were purchased. Important Bills and Legislations: Pres. PNoy wish to pass the Bangsamoro Basic Law and his interest on the controversial Anti-Dynasty Law which received the loudest applause from SONA expectators. When he mentioned his interest on Anti-Dynasty Law, it received the loudest applause from SONA expectators. â€Å"Panahon na para ipasa ang isang Anti-Dynasty Law.† PNoy also thanked Congress and Senate for other bills and acts such as Philippine Competition Law, Sin Tax Reform Act and Responsible Parenthood Act. The president also thanked officials of the government for their contributions, sacrifice and wellspring of inspiration to the nation. He lauded Interior and Local Government Secretary Mar Roxas for his contributions to Daang Matuwid. Pres. Aquino ended his speech with the following statement â€Å"Simula pa lang ito. [Palakpakan] Nasa unang yugto pa lang tayo ng dakilang kuwento ng sambayanang Pilipino. Sa gabay ng Panginoong Maykapal, at sa patuloy nating pagtahak sa Daang Matuwid, lalo pang tatayog ang mga pangarap na maaabot natin. Lalo pang lalawak ang kaunlarang tinatamasa natin. Nasasainyo pong mga kamay ang direksiyon natin. Magandang gabi po sa inyong lahat, maraming salamat sa inyong lahat po.† Reactions to President Aquino’s SONA: President Aquino missed so many important topics during his last and final SONA, the entire SONA centered on his administration’s accomplishment and giving credits to his partners on his â€Å"Daang Matuwid.† Some of the important issues that the President failed to mention during his sixth SONA are the following, the controversial PDAF issue, the Mamasapano Massacre, the expansion of Chinese territories in the West Philippine Sea and the Freedom of Information Bill to name a few.

Intellectual Property Rights And The Fashion Industry Cultural Studies Essay

Intellectual Property Rights And The Fashion Industry Cultural Studies Essay With a gross annual turnover of $750 billion per year the fashion industry is at the forefront of the worlds economy. Unlike most other goods, people demand fashion not for the added value or feature that a new item brings but for its own sake. People (mostly females) of all ages pour over magazines showing the latest celebrity fashions and then go out to retail fashion shows or browse online in search of something similar. This demand for the latest style of the rich and famous has transpired into a business network with an influence across the globe. This global business has brought with it many legal issues. Particularly important is the copying of the celebrity fashion that the masses seem to want. This essay will be broken into three parts. The first part will examine the current state of the law both in Australia and other jurisdictions. The second part will ask how the law can be changed in Australia to give greater protection to the fashion industry and the third part will lo ok at whether or not this change is necessary for the industry to grow. I will argue that the law needs to be reformed in such a way that copying is prohibited but flocking (following celebrity styles) isnt. IP law the reasons for its existence. The standard argument for the existence of intellectual property rights is that without them copyists will free ride on the creative efforts of others. Since most creative efforts are sold for economic gain absent any intellectual property rights the creators will see no incentive in creating when others can copy their designs and profit from it. The market for books, movies and music is protected from industrial copying in Australia by the Copyright Act. This act prevents the mass scale production of these creative works without licence or prior approval (with certain exceptions). This protection, gives the industry the comfort of knowing that its protected from the free-riding act of copyists. Albeit a creative work, the fashion industry remains vastly unprotected in many parts of the world. In Australia the Designs act of 2003 (which replaced the designs act of 1906) is the primary form of protection of designs for the industry. It is helpful to note at this point that the sketche s of designs are protected by the Copyright Act. Similarly, a new invention in clothing for example a new material that can keep one warm in winter and cold in summer would be protected by the Patents Act. This essay however is not concerned with those acts and their advantages or limitations. This essay is concerned with the protection of designs designs, researched and manufactured by the big designer houses and then copied by the high street for the masses. In a bid to regulate themselves from copying because of the absence of any laws to protect them the Fashion Originators Guild of America started self regulating the industry as early as the 1930s. Their method of regulation was to have designs registered with the Guild and any other firm copying these designs d be boycotted by members of the guild. The guilds activities were ruled as a violation of U.S. antitrust laws by virtue of a decision of the U.S. Supreme court in 1941. What concern us though are not the contents of that case, but rather whether the Guilds efforts in protecting intellectual property caused an increase in innovation and more frequent designs. Randal Picker suggests that the guilds efforts go to show that there was a need by the high end designers for this type of protection. He goes on to argue that the very theory of fashion means that the high end designers would only thrive in a market which was heavily regulated. This is because they market goods to a niche of customers who want to have what no one else has. These designers offer their customers unique one of a kind products and their customers purchase these because of the snob appeal these customers want only what others dont have. If there is no protection for their designs these designs would be copied by the high street stores and then the snob appeal of these goods will be lost. This means that these customers will not be willing to pay such high prices for these goods as they do not see a differential value in them. Although this copying has been around for almost a century and a half the problem is worsening due to improvements in information technology. The internet provides simultaneous access to fashions worldwide especially the European fashion weeks where big designers usually display their stuff and these are copied almost immediately. The poor quality of these copies means that some of these producers can get the products out to the market faster than the original desig ners. This means that once the designers products hit the market they have already lost their unique appeal. Further, since this fast fashion run-offs have become more highly sophisticated; the copyists can wait to even see which of the products seem to sell the most before they decide what to produce and they can then produce these trend setting items without having to take on the risk that their investment might not pay off. The basic theory of intellectual property would find this appalling. The big design houses spend millions of dollars on salaries for designers, researching market trends and organising expensive processes and fashion shows. Copyists however free ride on this work and produce cheaper substitutes. According to the traditional theory of IP this should lead to an economic disincentive on the part of the big fashion houses causing them to research and produce less. However the converse is true. We see that the bigger fashion houses continue to produce new creations every single year and the glamour of their products only increase. In order to understand why the standard disincentive is not in place we will need to look at the theory of fashion. The Theory of fashion Fashion theory dates back several hundred years. The Haute Couture stores of France were the powerhouses of fashion. No sooner was an item launched was it copied in America and sold to a larger market for much cheaper. It is important to make the distinction between close copying on the one hand (making replicas) and participating in trends on the other. Fashion changes often with some styles emerging as trends only to be soon replaced by other styles rising quickly to take its place. The demand for fashion is not merely a physical need although some people will wish to buy a new coast when their old one tears or a new cardigan because their old one looks worn. Fashion is more accurately a cultural expression. According to the fashion theory the theory of the leisure class fashion is usually adopted by elites with the purpose of being different from the masses. The masses then admire and demands goods that will emulate the elites. Consequently the elites abandon the older fashion, which has now been copied by the masses in favour of newer items that will distinguish them from the masses. This first theory of fashion suggests that fashion is driven by a an aspiration of social mobility on one hand (the masses trying to emulate the elite) and social stratification on the other (the elite trying to distinguish themselves from the masses) The other major theory is that of collective selection whereby fashion evolves through the collective process where many people, through their individual choices come to form the collective trend in society. The process of trend formation begins vaguely with a few people buying something of a unique design in the emulation of a celebrity and others copying it until a trend is formed. This theory is not purely about copying the elite, rather it is people following fashion because they desire to be in fashion and associate themselves with the latest styles and trends. This theory also called the Zeitgeist theory works through a matter of individual choice and collective social tastes. Whatever the theory prevalent in society one thing is certain and that is that the masses cannot afford the styles of the elite. Very few people in our society can afford t shirts from Armani and jackets from Polo Ralph Lauren. These large fashion house brands retail items at several hundred dollars apiece making it unaffordable to the masses. Fast fashion copying is the solution. The fast fashion outlets like Zara and Forever 21 provide these trend setting items at a fraction of the cost of the designer houses. One must not be mistaken here that they make exact copies of these items, because they dont. Rather their in house designers make inspirational pieces following the same trend but different. The items are visually similar to the ones of the high fashion houses and this is what many times has come before the courts under the Designs Act 2003 (Australia). Many of these fast fashion firms have shops on large high streets and have built themselves into a business empire. State of the law in Australia In Australia until the 17th June 2004 designs were protected by the Designs Act of 1906. According to the older legislation in order to register the design the design had to be: Features of shape, configuration, pattern or ornamentation applicable to an article, being features that, in the finished article, can be judged by the eye, but does not include a method or principle of construction This legislation did not strike a balance between what are considered ideal objectives of design legislation; to protect designs form free riding competitors but yet at the same time not stifle competition too much because innovation is usually a development on a previous design. The older legislation was also impractical for the fashion industry because of the nature of the law itself. According to the old law the applicant had to file a separate design registration for each variation to the similar product. This is impractical as many items of fashion come in different colours and sizes. Further the design application needed to be examined by the designs office before registration was granted. This meant that designs had to be submitted before they could be registered. This too was impractical to the fashion industry for a number of reasons. Firstly, by the time the process of submitting the design and registration was complete the item would already have gone out of fashion given the relatively fast lifecycle of fast fashion. Further submitting the designs would mean the designs would have to be completed earlier. Usually designers work on their designs until the last minute before the official launch working on extras until hours before the design goes public. The old designs regulation was clearly impractical for fashion and the replacement legislation in the form of the Designs Act of 2003 hoped to iron out some of the problems. Under this act the fashion industry benefitted heavily as protection was obtainable for more than one design (colour or size) of the same product. . However the official government fees for this is a drawback to the registration of more than one design of the same product. Under the new act the fees for the first design is $200 and for every variation of that design a further $200. This heavy cost especially for the mid budget fashion houses is disadvantageous. Further the new legislation permits the design to be registered even before a full examination of the product is undertaken. This gives time for the producers to tweak the designs even until the last minute before they are released. However, the examination whilst not compulsory needs to take place before the owner can take action against anyone who infringes on this design. Getting this inspection carried out is costly, costing $360 per variation of a design, and requires a lot of paper work; in the form of photographs and a Statement of Newness and Distinctiveness explaining how this design is new and distinctive from any others on the market (without which the registrar might not be satisfied that the product is new and distinctive). The courts have taken an interesting approach to the question of designs in the fashion industry. The first decision to be handed down after the enactment of the Designs Act 2003 was the Federal Court of Australias decision in Review v Innovative Lifestyle Investments Pty Ltd and concerned a dress produced by Review and registered of which Innovative Lifestyle Investments produced an identical design. Justice Jessup found that the striking visual similarity between the designs and the time period in which they were produced (the ILI dress coming out only a few months after Reviews) was an indication that the registered design was breached. However, calculating damages was difficult because Review did not wish to submit its sales figures to the court. Thus Justice Jessup awarded Review $7500 in damages due to minor loss of reputation as not being a brand of originality and another $10,000 for ILI continuing the sale of the dresses after finding out about Reviews registration. ILI plan s on appealing the decision so it will be interesting to see what decision the appellate court hands down. This case shows that whilst there is sufficient legal protection in Australia for the protection of designs there are several limits to the protection. One such limitation is time. It took about seven months for the Review design to be registered. Items which are not timeless items like Reviews dress would have the long passed their fashion expiry before the registration of these items were completed. Since action cannot be taken until registration is completed this would mean that many designers would potentially not be willing to take action as the product would no longer be an item in stock. Further the need by the judges to assess the loss in sales would require firms to furnish in court their sales and projected sales figures. This might be highly sensitive information that they would not want competitors, in the highly competitive market, to know. Finally the value of dam ages awarded in this case was not high against ILI. If this case is anything to go by the exemplary damages are arguably not sufficient to deter copying. Rather many copyists would see this as merely the cost of doing business. Copying of items in the fashion industry can also be protected by copyright law. The copyright law provisions are used when there is an artistic or craftsmanship appeal to the garment. Protection under this provision was brought before the courts in 2008 by Elwood a manufacturer of trendy youth clothes. Elwood alleged that Cotton On had violated its copyright for two computer generated drawings; the New Deal tshirt and the swing tags attached to these garments. They alleged that Cotton On had sold several hundred tshirts which were visually similar to the New Deal tshirts. Cotton On conceded that the only difference was the wording but otherwise they had copied the design drawings. The first question the court had to answer was whether the designs drawings were drawings and thus entitled to protection under the act (as artistic works). The key to answering this question was whether the wording was to be read as text or whether they were for pictorial purposes. The court found that th ey were a pictorial which was designed to bring recognition to the Elwood brand. Accordingly the design drawings were the subject of the Copyrights Act. After determining that the designs were copyright works, the judge had to determine whether they were original Elwood drawings. The judge found on the evidence that this was an original drawing as Elwood had spent several weeks and a lot of effort creating them and thus they satisfied the originality criteria. That being assessed the judge had to then work out whether what Cotton on had copied amounted to a substantial part. In his honours opinion Cotton On had copied only the shape and the form of the item and not the wording or symbols of the design and thus did not create a visual similarity with Elwoods design. His honour said that the degree of copying was in keeping with Cotton Ons theme, same but different. We see here that even through copyright law it is hard for the copyright holders to have protection for their designs. The problem of free riding occurs when larger companies like Elwood carry out research and spend both time and money creating the brand and fashion statement. The copyists then free ride on this and tweak the designs slightly so that they can get around the law and as such they benefit from the hard work and risk taking of other firms. The Design/Copyright Overlap Whereas copyright law must encompass an element of artistic craftsmanship (such as the digital designs of both the tshirt and the tag in the Elwood case) or used to protect one off designs such as individual garments or pieces of jewellery; garments which are commercially marketed need to be protected by the Designs Act. For many years governments have been trying hard to emphasise this distinction. Their rationale suggests that when it comes to the shape and appearance of designs the Designs Act is more appropriate and people wanting their items to be mass produced for commercial sales should register their designs. To give effect to this policy the government has included provisions in the copyright act to close the loopholes that existed in previous legislation. Some of the provisions intend that purely two dimensional designs will have dual protection under the copyright and designs act. The other main change is that people creating works of artistic craftsmanship can choose whet her or not to register the design (but registering will generally result in a loss of copyright). It follows that the design copyright overlap has been made clearer as a result of the amended designs act and changes to the Copyrights Act. This has been the governments attempt to make the laws clearer and friendlier to give designers a more protected environment in which to carry out their work. It can be seen however, that the cost of registering the designs as well as the cost of enforcement of the registered design (litigation and related costs) are high in comparison to the damages receivable especially if the original designer is hesitant to make too many figures known to the court. Further, especially for claims under the Copyrights Act, the burden of proof is very high. The courts have been very careful to interpret the word substantial and as was seen in the Elwood case, although the copyright was found in favour of Elwood the court held the outcome in favour of Cotton On because they said that the visual appearance was not substantially similar to the Elwood design. This decision begs the question as to whether items can be copied so long as the colour and wording has changed. Whilst this might be perfectly acceptable in other industries, judges fail to understand the uniqueness of fashion, where it is not the item itself that matters but the advertising, marketing and style promotion than creates the trend for the item. It is arguable then that when considering designs and copyright protection the court should look deeply into merely just the design or drawing and focus on the value of the design or drawing in creating the trend fashion. That said, it is difficult to assess where exactly the trend originated. Some argue that the trend originates with the celebrities in Hollywood and others argue that the trends originate from the catwalks of Europe. These claims are however disputable as there are new and emerging fashion design centres around the world especially in Australia where the seasons are opposite to those of the countries in the Northern hemisphere making it impractical to follow their trends. Thus the onus of proving who started a trend might eventually mean that there is no protection for any designer since all fast fashion designs are usually a variation of some trend or item. Reforms: The US lacks fashion copyright protection completely and this has given rise to an entire industry that copies and tweaks. Fashion industry specialists call this blatant piracy looking great for cheap. One fashion expert reports that a high street fashion brand like Forecer 21 copies and retails a $2000 dress for $80 and even shoes by the renowned designer Balenciaga worth over $600 dollars is copied and sold by Steve Madden for $60. The lack of adequate safeguards in the US as opposed to Australia is the cause of this. Experts say that the up and coming designers are those at the biggest risk because they can ill afford the legislation needed to fight back. The Australian law can perhaps take some ideas for reform from the amendments suggested by the US Copyrights office. The first as a part of several suggestions is that the protection time frame be reduced from 10 years to 3 years. This is because the haute couture fashion where items retail for several hundred dollars a piece will usually have lost their exclusivity or reached the end of their fashion peak well within the three years. Although designs change fast a reason for the longer period of three years is to also include classic fashion items like the Guy suit by Hugo Boss. Another reform that has been suggested that we might adopt in Australia is that registration must be completed and take place within three months from the date that it goes public. This means that once a design is registered the designer has upto three months to organise for the inspection to be carried out for the item. This gives the designer more flexibility to decide which designs are profitable and then decide which ones he wants to register thus saving on the costs of statutory fees and paperwork. Finally they suggest that there be a special fashion board set up to deal with the fashion industry where a group of experts independently asses the item such that they can better understand the subtleties of a new design as opposed to an old one and thus the granting of registration will be fairer. Along with this Ralph Brown suggests that in order to make the enforcing more affordable this board be also given the power to handle conflicts. He argues that this be the first instance board that reviews the complaints that designers have if they feel that their designs have been breached. This board should be entrusted with the power to make a non binding directive (after analysing the evidence) in favour of or against the claimant. He argues that because this board will be made up of fashion experts they will be in a better position to analyse the breaches. If Australia had a system like this, then the Elwood decision might not have been decided the way it was. This board would have b een able to realise the subtleties of the trend style which His Honour in that case failed to see. In other words they will interpret the law in the context of the industry and not on the black letter analysis of the law. He concedes that the court is the ultimate arbitrator and he argues that if one or both parties are not willing to settle based on the boards directive then they could appeal the decision to court. The rationale for this approach is that to save costs and reputation most firms will settle out of court. What is important in any reform is having a balance between protecting the designs of those whose spend time, skill and money developing the latest fashions against the interests of the masses who want to be in fashion and who are willing to buy the cheaper counterfeits. The recommendations mentioned above would definitely allow designers to make the most of protecting their designs and their investments. In keeping with the standard theory of intellectual property i t is likely to increase investment in the industry. The large fashion houses might be willing to come up with more designs, and varieties of designs because they feel that there is an inexpensive way of enforcing their intellectual property rights. At the same time younger designers will be willing to release more designs into the market because they feel that they are better protected and can enforce their intellectual property system in a way that is understandable and cost effective to them. On the other hand the method proposed above would benefit the high street fast fashion firms as a trained eye in the board is likely to be able to spot the difference between blatant copying and trends. Zara for example will be able to produce in the confidence that when they produce dresses a trained eye in the design board will be able to easily tell that theirs is not an imitation of an original dress but rather a variation in style but within the scope of trends. This is something that the judges find hard to understand because as Susan Scaffidi (one of the most prolific fashion law writers) put it it is hard to have a sixty seventy year old white man look at an item of chic ladies fashion and decide whether or not copyright has been breached. Another proposed reform is that the costs of applying for design can be reduced by the government. The UWA faculty of law expert has written that making the registration process cheaper might be possible by maintaining an online database of all the designs. He argues that if design registration is cheaper more designers are going to seek it and this will be better for the intellectual property regime. The bigger fashion houses also argue that their selling point is that their styles are unique and those who purchase from them pay so much because of the snob appeal of the item. They argue that with so much copying their unique designs become less unique and as such they have to keep designing more items to keep up the unique appeal. Alain Wertheimer , Chairman of Chanel when asked about this in an interview to the Newsweek said that because of the vast amount of copying going on in the industry people are willing to pay less and less for designer clothes as they see no snob appeal in them. She says that as a result the bigger fashion houses are finding it hard to survive and that her brand too has had to undergo diversification to survive. Donatella Versace arguing on the same point says that Versace has had to diversify into manufacturing lifestyle items and dinner sets too because of insufficient protection by the government. Raustiala and Sprigman, in their article the Piracy Paradox argue very strongly that a strong intellectual property regime will not change anything. They argue that people keep demanding the latest trends and as long as the demand is there the suppliers will continue to provide for it. They also argue that the market will not change by much because the masses will not be able to afford the original designs anyway. They rationalise this theory to a fixed amount that people are willing to pay for items even if they were Zeitegists. This is because after a point fashion becomes a luxury good and the demand is therefore inelastic. People, they argue, after a point are not willing to sacrifice necessities for luxury goods and will do one of two things, either do without it or be content with older collections. They further argue in direct rebuttal to the claims of Alain Wertheimer and Donatella Versace that as a result of the big fashion house designs being copied and reproduced people who demand the unique style that comes with these designer products will keep purchasing more and it is good for their business. Their rebuttal to this is found in their theory of induced obsolescence. They argue that because clothing is about perception the demand for the goods is because the highly fashionable people have them and to not have them means that one is unfashionable. They also argue that in line with the theory of the leisure class that once more people have it those who demand unique products will want something else for the snob appeal. They argue that this causes the cycle all over again. Thus we can see that as more items are copied this puts pressure on the fashion houses to produce newer and more distinctive items. As such they can produce more often and their profits increase. Logically , it then flows that copying whilst being a part of the business of the copyist firms is also beneficial to the large fashion houses because the elite will keep demanding newer styles and this increases their business. This is called induced obsolescence by copying. They further argue that by the masses flocking to buy the latest styles there is an automatic trend created and as such the large fashion houses benefit because those on the marginal income lines will tend to purchase the fashion house brands so that they can be a part of the trend. It is also arguable that because the trends are so short lived for most of the casual wear collections (an average style time for the Armani Tees is seven months) even if there are tougher intellectual property law few firms would go through the trouble of registering all but their most classic designs. Conclusion In this essay we have looked at the reasons for the existence of intellectual property generally. We have then identified the theories of fashion and seen how people demand in style products so the copyists employ designers not to make an exact replica of the item but to make an item similar such that the item is a part of the trend. We have then considered the law in Australia. We have looked at how the Designs Act and the Copyright Act play an important role in protecting the designs and drawings of the designers. We have identified that the courts have had a mixed approach to enforcing right under the act. We saw in the Review decision the impracticality of taking an action to Court under the Designs Act. We saw that this impracticality was because the claimant needs to submit highly sensitive figures for the courts to make a decision. Further, we saw that the Elwood decision in which it is probable that the judge misunderstood that what Elwood was doing was setting a trend for pr inted tees. We then argued that it is impossible for courts to find the difference between trends and styles and argued that perhaps we do not want them to rule against style. This paper also suggested possible reforms to the law and to the method in which the law should be administered. These reforms flow from our previous analysis of the method of administration of the law being impractical. It was proposed that the proposed methods would help the administration of the system as well as make a more streamlined an easier system for designers to enforce their rights. However, when we consider the theories of fashion as a whole and when we consider the article by Raustiala and Sprigman, we see that reform really isnt necessary. Reform will not dynamically change the face of the industry because most designers will not go through the trouble of registering their designs as the design life cycles are very short and the trouble taken to register designs is not worth their while. We also see that reform is not necessary because copying (otherwise referred to as trend setting) is helpful to the big fashion houses. It stimulates designs for their products and increases their sales. We started off by saying that the industry is worth $750 billion a year. There seems to be enough money to go around. Any changes which impose tighter control will only reduce the value of the industry and push many out of business.

Nanotechnology In Architecture

Nanotechnology In Architecture Historically and geographically human have lived in extremely varied technology or environment and have had to adapt to comfort habitats and thus the architects have had to manage the ideal of design as well as incorporate the evolutionary technology. A technology has evolved to a level where it is just too complex. Sometimes satisfying the need of the user and sometimes becoming too dangerous when the negative consequences are not taken care of. For example, the issues of the Large scales in architecture is one such matter which has been partially solved with the help of low cost materials, energy savingà ¢Ã¢â€š ¬Ã‚ ¦etc. The scientists have developed and are continuing to develop nanotechnology to help architects incorporate more artificial intelligence in construction. Nanotechnology is a combination of various fields of science like, Bio- technology, Chemistry, Physics, Bio-informatics, etc. There are three chief divisions in Nanotech: Nanoelectronics, Nanomaterials, and Nano-Biotechnology. Worldwide, there is much enthusiasm about nanotechnology as it has application in medicine, electronics, biomaterials, energy etc. It is observed that US, Japan, and Germany dominate the current RD effort in nanotechnology with a focus on they own expertise and needs (Hyd and spook, 2012). The use and control of the technology at an atomic or particle scale known as nanotechnology has started to have its impact like never before in materials of constructions and has immense futurist impact in architecture, this application of the nanotechnology and nanomaterials in architecture is NanoArchitecture. The nano world in technology is a real challenge for todays designers, it started with an understanding and control of the technology and materials on one billionth (10-9) scale. The understanding of these materials, its use in architecture to be profitable for users and its implication on the building (Construction) are some of the key aspect for inquiry in this dissertation. With the perfect solution of this dilemma, the Architects would not only know how big their task is but how it might lead to new ways of thinking architecture. After understanding the meaning and origin of this technology, we will study certain aspects that is a must in todays constructions and then we see the direction where this science is going, we will also look at the ways to incorporate these technologies in our architecture, therefore the question that will guide our research is how does nano (technology, materials, science, concept, form and function) become important to the level of influencing architects (designers). Nanotechnology is developed in the manner that it is active or passive, this repartition will lead us to a large study but our focus will rely on the relation passive active nanostructure and application of nanotechnology in a building design and construction. Passive nanotechnologies, such as nanocoatings, nanoparticles, and nanostructured materials, are already available. Second generation active nanostructures, for example, nanoelectro-mechanical systems, nanomachines, self-healing materials, and targeted chemicals, can evolve their properties, structure and/or state during their operation. This could increase nanotechnologys impacts and require new approaches for risk assessment. Active nanostructures are likely to have a different and increased profile of impacts (including benefits as well as potential risks) compared with passive nanotechnologies. RESEARCH QUESTION: How does nano (technology, materials, science, concept, form and function) becomes important to the level of influencing architects (designers). NEED IDENTIFICATION: Over the years the materials used in buildings (during construction, inside or outside finishes) has been of a large scale, the evolution today have brought into existence the materials on a microscopic scale with even more value to life and building. They can be metals, ceramics, polymers or composites. Known as nanomaterials, nanocomposites, and manufactured nanomaterials (MNMs), the method of making these materials begins at the molecular or atomic level, sometimes creating new products with extraordinary physical and chemical properties. For example, a carbon nanotube has strength of 150 times that of steel but is approximately six times lighter. Besides strength enhancement, properties can include self-cleaning, super hardness, electrical conductivity, antimicrobial superior thermal resistance and stability, non-flammability, lightweight, anti-corrosion, superior barrier, light emitting and low permeability, among others. Applications in the building industry include use as fire retardants, high performance insulation, protective coatings, equipment lubricants, structural integrity enhancement and monitoring, photovoltaic, stronger tensile cables, and self-cleaning or heat absorbing windows ( CFN, 2011 )à ¢Ã¢â€š ¬Ã‚ ¦ Using these materials which contain extraordinary application in the building can also bring amazing influences to the architect, designer or the design. Therefore apart from attempting to understand the transformation that the nanotechnology brings to our building there is a need to understand by students the uses of nanotechnology for creating better design. SCOPE: à ¢Ã¢â€š ¬Ã‚ ¢ A general understanding of nano especially toward architecture à ¢Ã¢â€š ¬Ã‚ ¢ Nanotechnology (materials) applications in buildings à ¢Ã¢â€š ¬Ã‚ ¢ Concept; form and function derived from nano LIMITATION: à ¢Ã¢â€š ¬Ã‚ ¢ The laboratories details of certain materials and nano applications in medical branches will not be part of our research. à ¢Ã¢â€š ¬Ã‚ ¢ This research dissertation will have some limitation in details like calculations, manufactures process, chemical components. à ¢Ã¢â€š ¬Ã‚ ¢ Thinking in more detail about how to use nanomaterials in a design context, a first consideration is simply to define what is being design?. But there is a lack of built case studies, so we will rely on existing, futurist, basic concept and reading materials. à ¢Ã¢â€š ¬Ã‚ ¢ Regarding the size of this matter nanotechnology, we will limit at the level where nanotech is active and very briefly talk about the passive Nanotechnology RESEARCH METHODOLOGY: N A N O A R C H I T E C T U R E PART O. COLLECT RELEVANT DATA This methodology starts with a basic understanding (through various sources) of nano technology specially its applications in the materials and its relation with form and function in architecture. A. Research Books B. Online discussions; ancient and actual debates. C. Study previous paper or dissertations and case studies done on this matter. D. Literature survey; Consist keep together all info found and relative to the topic and relevant to the research question. PART I. INTRODUCTION, NEED IDENTIFICATION, SCOPE AND LIMITATION OF THE RESEARCH PART II. NANOTECHNOLOGY What is nanotechnology Nanoproducts Categories (Passive and Active) Why this fuss Nanotechnology risk Sectors application NANOTECHNOLOGIES APPLICATIONS IN ARCHITECTURE = NANOARCHITECUTE PART III. APPLICATION-FORM AND FUNCTION with its Impact Air-purifying Anti-fogging Solar protection Fire-proof Anti-graffiti Scratchproof and abrasion-resistant Anti-fingerprints Self-cleaning Easy-to-clean (ETC) Thermal insulation Temperature regulation UV protection Anti-reflective N. Antibacterial Case studies and examples showing how does certain of these proprieties can be include and what promise does it bring to buildings; New architectural readying. New creativities in form and functions. C O N C L U S I O N CASE STUDY METHODOLOGIES: Primary Case study By consulting an expert in the energy consumption field and materials that relate to it. The reading of the applications in nanotechnology in todays constructions is more related to Green designers, this part of the design has an impact in the ecology and climate control therefore the green rated buildings has in fact a considerable amount of nanotechnology use in it. This leads us to refer to architects involved in green concepts or sustainability from LEED etc ( Ar Alex Nyembo Kalenga) and also we could make a visit studies on the actual certified Green building Rajiv Gandhi urja Bhavan at Vasan Kunj New Delhi Still in Construction. A list of questions has guided our study and survey interview in which the answers are include to our conclusion of this research: 1. A personal understanding of Nanotechnology or Nanoarchitecture. 2. If any specific material at a nano scale is used to improve certain aspects in the building, such as: Insulation reduction Lighting Energy storage Air purification Water management 3. How do you think buildings designed exclusively on scientific principles of Nanotechnology will affect their occupants? 4. Does Nanotechnology have an impact on todays practicing architects If yes; at what scale does it influence them? Any example? If not; Why so? Secondary Case study The conceptual level derived of the interpretation of nano differs from an architect to another. 1. Two typology of this nano buildings as guided this part of the research: 5. Existing Nano Buildings ( Nano House Initiative, Australia ) 6. Futurist Nano Buildings ( Multi-storey Apartment building, 2001 ) 2. A list of materials (Function) originated from nanotechnology or concepts that have already been involved to some construction process, structurally or non structurally, environment effect has been touched on to clarify its impact to architecture. REFERENCES.. Hyd and spook (2012, January), nanotechnology in india. Retrieved from http://www.indianofficer.com/forums/11771-nanotechnology-india.html#ixzz2Awlr7jNb Center for Functional Nanomaterials ( 2011). Nanomaterials for architecture and buildings. Brookhaven. Retrieved from http://www.solaripedia.com/13/360/nanomaterials_for_architecture__building.html NANOARCHITECTURE Importance of nanotechnology in architecture N A N O T E C H N O L O G Y II.1. Fundamental Knowledge II.1.1. WHAT IS NANOTECHNOLOGY? A brick is the smallest building block in construction. Whatever you do, the strength of the building is limited to the strength of the brick. The brick itself is made of minute particles of clay bonded together. One has limited control over how the particle of clay forms. Each particle of clay in turn is formed from molecules joined together in a particular pattern dictated by the forces of nature. What happens if it is possible to arrange these molecules in a pattern that provides greater strength? You get stronger clay and a stronger brick. This results in a much thinner, but stronger wall. This technology of arranging molecules the way we want is a basis of nanotechnology. (Johnzactruba, 2011) A strict definition of nanotechnology characterizes it as the manipulation of a matter at the scale of one-billionth of a meter or smaller. The measurement of one-billionth of a meter is identified as one nanometer (nm) (Jeffrey H. Matsuura,1957). Nano, is a word which does not only mean billionth less but also leaves a billionth of question in mind, because of the complexity to understand its simplicity. It is a world hold by the scientist, chemist and physicians. Yes nanotechnology is a relatively recent development in scientific research but not new. The level of its study and diversity has involved touching now many sector of life and becoming more and more known by the public. The concept first was introduced by American physicist Richard P. Feynman (1918-1988). But it is noted that in the 10th centuries the 16th centuries the ruby-red color of many stained-glass windows from the medieval era was a consequence of embedded nanoscale metallic particles within the glass. There were no scientific understanding of these phenomena at the time, nor were there deliberate attempts to produce what we now know as nanomaterials. Early knowledge relied on craft-based trial and error to achieve effects we must keep in mind, however, that not all interesting color phenomena are a result of embedded nanomaterials ( Michael F. Ashby, 2009). The evolution of nanotechnology has been more or less in the domain of chemical, medicine and physics (technique) then it involved to the environment, energy, agriculture, communication and information because of some of its advantage and disadvantage in the society. The main tools used in nanotechnology are three main microscopes: Transmission Electron Microscope (TEM), Atomic Force Microscope (AFM), and Scanning Tunneling Microscope (STM). (Jamie Jackson, CIS 121) II.1.2. NANO PRODUCTS Use as gateways to build other nano products, Nanosensors can be chemical sensors or mechanical sensors. Amongst other applications they can be used: à ¢Ã¢â€š ¬Ã‚ ¢ To monitor physical parameters such as temperature, displacement and flow à ¢Ã¢â€š ¬Ã‚ ¢ As accelerometers in Microelectromechanical systems (MEMS) devices that can rapidly and remotely detect change in their surroundings like airbag sensors à ¢Ã¢â€š ¬Ã‚ ¢ For medical diagnostic purposes either as blood borne sensors or in lab-on-a-chip type devices à ¢Ã¢â€š ¬Ã‚ ¢ To detect various chemicals in gases for pollution monitoring à ¢Ã¢â€š ¬Ã‚ ¢ Sensors using carbon nanotube detection elements are capable of detecting a range of chemical vapors. These sensors work by reacting to the changes in the resistance of a carbon nanotube in the presence of a chemical vapor ( Hawks Perch Technical Writing, 2007). II.1.2.1. Nanotube Known as well as Carbon Nanotube (CNTs), it is a tube-shaped material or cylindrical nanostructure made of carbon, having a diameter of nanometer scale. Nanotubes form a tiny portion of the material(s) in some baseball bats, golf clubs, or car parts. Carbon nanotubes are the strongest and stiffest materials yet discovered in terms of tensile strength and elastic modulus respectively. In 2000, a multi-walled carbon nanotube was tested to have a tensile strength of 63 gigapascals (GPa). Since carbon nanotubes have a low density for a solid of 1.3 to 1.4 g/cm3, its specific strength of up to 48,000 kNà ¢Ã¢â€š ¬Ã‚ ¢mà ¢Ã¢â€š ¬Ã‚ ¢kgà ¢Ã‹â€ Ã¢â‚¬â„¢1 is the best of known materials, compared to high-carbon steels 154 kNà ¢Ã¢â€š ¬Ã‚ ¢mà ¢Ã¢â€š ¬Ã‚ ¢kgà ¢Ã‹â€ Ã¢â‚¬â„¢1. Standard single-walled carbon nanotubes can withstand a pressure up to 24GPa without deformation. The bulk modulus of super hard phase nanotubes is 462 to 546 GPa, even higher than that of diamond (420 GPa for single diamond crystal) and can produce materials with toughness unmatched in the man-made and natural worlds. Because of the carbon nanotubes superior mechanical properties, many structures have been proposed ranging from everyday items like clothes and sports gear to combat jackets and space elevators. However, the space elevator will require further efforts in refining carbon nanotube technology, as the practical tensile strength of carbon nanotubes can still be greatly improved (Wikipedia, 2012). II.1.2.2. Nanocomposites The definition of nano-composite material has broadened significantly to encompass a large variety of systems such as one-dimensional, two-dimensional, three-dimensional and amorphous materials, made of distinctly dissimilar components and mixed at the nanometer scale (Kanatzidis, 2006). New materials with novel proprieties are generate rapidly through this field. The properties of nano-composite materials depend not only on the properties of their individual parents but also on their morphology and interfacial characteristics. Although nanoscale reinforcements (or nanofillers) of nanocomposites have different kinds of fillers such as nanofibers, nanowires, nanotubes and nanoparticles etc, their mechanical behaviors have some common features. As the figure shows a potential use of nanocomposites as multifunctional materials (Journal Club, 2008). AREA OF APPLICATION Such mechanical property improvements have resulted in major interest in nanocomposite materials in numerous automotive and general/industrial applications. These include potential for utilisation as mirror housings on various vehicle types, door handles, engine covers and intake manifolds and timing belt covers. More general applications currently being considered include usage as impellers and blades for vacuum cleaners, power tool housings, mower hoods and covers for portable electronic equipment such as mobile phones, pagers etc (Professor J.N. Hay, 2001). The inorganic components can be three-dimensional framework systems such as zeolites, two-dimensional layered materials such as clays, metal oxides, metal phosphates, chalcogenides, and even one-dimensional and zero-dimensional materials such as (Mo3Se3-)n chains and clusters. Experimental work has generally shown that virtually all types and classes of nanocomposite materials lead to new and improved properties when compared to their macrocomposite counterparts. Therefore, nanocomposites which combine new nanomaterials with more traditional ones such as steel, concrete, glass, and plastics, can be many times stronger than standard materials and promise new applications in many fields such as mechanically reinforced lightweight components, non-linear optics, battery cathodes and ionics, nano-wires, sensors and other systems. On the market there already a nanocomposite steel that is three times stronger than conventional steel. Before long, nano-reinforced glass might be used for both structure and enclosure. In the some student projects in the nanoSTUDIO at Ball State University, nanotube structural panels create transparent load-bearing curtain walls free of columns and beams, quantum dots make walls and ceilings light up or change color with the flip of a switch, and nanosensors in building components create smart environments that constantly adapt to their environment and users. II.1.3. TYPOLOGY M. C. Roco, one of the driving forces behind the NNI, has developed a more detailed typology of nanotechnologies. He identifies four generations of nanotechnologies: passive nanostructures, active nanostructures, systems of nanosystems and molecular nanosystems (J. Clarence, 2009) ( Fig04: For generation of nanotechnology development, Center for Responsible Nanotechnology ) Each generation of products is marked by the creation of commercial prototypes using systematic control of the respective phenomena and manufacturing processes. Products may also include components which correspond to different generations. Todays rudimentary capabilities of nanotechnology for systematic control and manufacture at the nanoscale are expected to evolve significantly in both complexity and the degree of integration by 2020. II.1.3.1 Passive to Active nanotechnology It has been suggested that an important transition in the long-run trajectory of nanotechnology development is a shift from passive to active nanostructures. Such a shift could present different or increased societal impacts and require new approaches for risk assessment. An active nanostructure changes or evolves its state during its operation, according to the National Science Foundations (2006) Active Nanostructures and Nanosystems grant solicitation. Passive: (steady function) nanostructures Behaviour: inert or reactive nanostructures which have stable behaviour and quasi -constant properties during their use. Potential risk: e.g. nanoparticles in cosmetics or food with large scale production and high exposure rates. Active: (evolving function nanostructures) Behaviour: the nanostructures properties are designed to change during operation so behaviour is variable and potentially unstable. Successive changes in state may occur (either intended or as an unforeseen reaction to the external environment). Potential risk: e.g. nanobiodevices in the human body; pesticides engineered to react to different conditions. Categories of active nanostructures are: à ¢Ã¢â€š ¬Ã‚ ¢ Remote actuated active nanostructures, such as light-actuated embedded sensors; à ¢Ã¢â€š ¬Ã‚ ¢ Environmentally responsive active nanostructures, such as responsive drug delivery; à ¢Ã¢â€š ¬Ã‚ ¢ Miniaturized active nanostructures, such as synthetic molecular motors and molecular machines; à ¢Ã¢â€š ¬Ã‚ ¢ Hybrid active nanostructures, or uncommon combinations of materials, such as silicon-organic ; à ¢Ã¢â€š ¬Ã‚ ¢ Transforming active nanostructures, such as self-healing materials. (M.C. Roco, 2004, 2007) Tour estimates the time it will take to commercialize each of these types as 0-5 years for passive nanotechnologies, 15-50 years or more for active nanotechnologies and 7-12 years for hybrids (J. Clarence, 2009) II.1.4. WHY ALL THE FUSS ABOUT NANOTECHNOLOGY? NANOTECHNOLOGY: THE SCIENCE CHANGING YOUR LIFE Penny Sarchet The advantages of using nanomaterials in construction are enormous. When you consider that 41 percent of all energy use in the United States is consumed by commercial and residential buildings, the potential benefits of energy-saving materials alone are vast (Dr. Pedro Alvarez of Rice University, 2010) and when we have to evaluate the energy used by buildings in the rest of the world the result will surly show that the use of the nanomaterials in buildings will be of an anxiety necessity. Nanotechnology thus has profound potential because it can free us from some traditional limits and offer us useful new capabilities. Nanotechnology can change some of the physical rules that have traditionally confined us. It can also free us from some of the limitations that have long been placed upon us by size ( Jeffrey H, 1957). The key is to understand the specific risks and implications of the product before it is widely used. This way we can ensure that nanotechnology evolves as a tool for sustainability rather than as an environmental liability (Dr. Pedro Alvarez of Rice University, 2010). Benefices and profit with the nanotechnology is now in the hand of everyone and architects are with no doubt going to shape this realm to another level. e.g.: Solera enables seamless integration of natural daylight into the design and function of buildings. Well daylighted spaces deliver substantial and measurable benefits to sustainability, energy efficiency and human performance. This series of products provide architects with solutions to solve the challenges traditionally associated with daylighting techniques including solar heat gain, cost, complexity and glare. Other materials such as brickà ¢Ã¢â€š ¬Ã‚ ¦ have already showed us the changes that it has done to the industries, life, designers, buildersà ¢Ã¢â€š ¬Ã‚ ¦ In the early days, paint was available in a limited variety of colors for you to choose. Now most of the paint shops have mixers that allow the users to choose the color they require. The manufacturers have to produce and stock only a few basic colors, reducing production and inventory costs at much greater satisfaction to the consumer. The future of nanotechnology will be the personal nano-factories, like the paint mixers, that allow you to produce any material that you require. The shops have to carry only stock in molecular form. Advances in nanotechnology are moving at an exponential rate. It will eventually encompass every field of human activity including energy. (Johnzactruba, 2011) Disadvantages of Nanotechnology: Safety hazards with nanomaterials, Some studies detected possible cancer-causing properties of carbon nanotubes, Some nanomaterials bounded with other materials or components (Jamie Jackson, CIS 121) II.1.5. RISK OF NANOTECHNOLOGY It is obvious to find out that except from the greatness and impressive opportunities that nanotechnology offers, the risks are associated with it as well. And these risk touch-up on Health, environment, Industryà ¢Ã¢â€š ¬Ã‚ ¦ Because of the size of the particles, nanomaterials may enter human and other living bodies and disrupt body-functions. Some nanoparticles may also be non-biodegradable thereby posing a new threat to the environment. Therefore it is crucial to examine and estimate the risk for regulating the production, use, consumption and disposal of these materials. (Hyd and spook, 2012). For example, Health effects of several insulating materials are a concern; 1. The fibers released from fiberglass insulation may be carcinogenic, and fiberglass insulation now requires cancer warning labels. 2. There are also claims that the fire retardant chemicals or respirable particles in cellulose insulation may be hazardous (Dr. George, 2007). The risk most talked about is the ability of nanotech carbon tubes to potentially cause asbestosis-type illnesses, (Mike Childs, 2012) Manufactured nanomaterials (MNMs); and nanocomposites are being considered for various uses in the construction and related infrastructure industries. To achieve environmentally responsible nanotechnology in construction, it is important to consider the lifecycle impacts of MNMs on the health of construction workers and dwellers, as well as unintended environmental effects at all stages of manufacturing, construction, use, demolition, and disposal. Emphasis in industries; In India, late industry participation has also begun in this area, and there is an emphasis on fostering public-private partnerships (PPP). Nonetheless government support to this sector remains crucial for three reasons: 1. Nanotechnology is a capital-intensive technology and is in an embryonic phase, thus industry would not be able to sustain the research effort needed for the establishment of scientific and technological infrastructure. 2. The state is required to define the regulatory framework. In 2010-11 this process was initiated. 3. The state ,particularly in the developing country context, can set the agenda and resist the tendency to uncritically follow international trends in research that do not address their developmental needs. REFERENCES.. Dr. George, 2007. Insulation, nanotechnology for green building. Retrieved from http://esonn.fr/esonn2010/xlectures/mangematin/Nano_Green_Building55ex.pdf page 12 Dr. Pedro Alvarez of Rice University (2010, January). Future Cities: Nanotechnology promises more sustainable buildings, bridges, and others structures Retrieved from http://portal.acs.org/portal/acs/corg/content?_nfpb=true_pageLabel=PP_ARTICLEMAINnode_id=2103content_id=CNBP_025646use_sec=truesec_url_var=region1__uuid=00475ea1-8da9-4443-8448-baaff07d9f4a Hawks Perch Technical Writing (2007). Carbon nanotubesand applications. Retrieved from http://www.understandingnano.com/nanotubes-carbon.html Hyd and spook (2012, January), nanotechnology in india. Retrieved from http://www.indianofficer.com/forums/11771-nanotechnology-india.html#ixzz2Awlr7jNb Jamie Jackson, CIS 121: Computer Programming II (C++). Nanotechnology and the Development of Computer Circuits retrieved from Jeffrey H. Matsuura, (1957). Nanotechnology regulation and policy worldwide. why all the fuss about nanotechnology?. Artech house, boston-london. Journal Club ( 2008, may ). Mechanical Behaviors of Polymer-matrix Nanocomposites. Retrieved from http://me.utep.edu/lrxu/Mechanical%20Behavior%20of%20Polymer.htm J. Clarence davies, PEN( 2009, April) Oversight of next generation NANOTECHNOLOGY Johnzactruba, (2011, may). Applicationof nano technology for energy, Retrieved from http://www.brighthubengineering.com/power-plants/87228-applications-of-nanotechnology-for-energy/ Kanatzidis, (2006, may). Nanocomposites. Retrieved from http://www.cem.msu.edu/~kanatzid/Nanocomposites.html Michael F. Ashby, Paulo J.Ferreira, Daniel L. Schodek, (2009) Nanomaterials, Nanotechnologies and Design, a brief history of materials, elsevier Ltd. pg 29 Mike Childs, 2012, march technology making the splash. http://www.guardian.co.uk/nanotechnology-world/technology-making-a-splash M.C. Roco (2004, 2007), shift to active nanostructures is hypothesized. Retrieved from http://bit.ly/activenano Professor J.N. Hay and S.J. Shaw (2001, September). Nanocomposites: proprieties and applications. Retrieved from http://www.azom.com/article.aspx?ArticleID=921 Wikipedia ( 2012, november). Carbon nanotube. Retieved from http://en.wikipedia.org/wiki/Carbon_nanotube NANOARCHITECTURE Importance of nanotechnology in architecture A P P L I C A T I O N S ( Fig05: Analysis of Nanotechnology from an Industrial Ecology Perspective Part I: Inventory Evaluation of Life Cycle Assessments of Nanotechnologies.) III.1. Environmental application Environmentally, Nanotechnology also has the potential to help our environment. Example: It controls pollution through source reduction. This is a method of eliminating toxic waste at its source, with the understanding that releasing the waste into the environment is the last resort. Source reduction can be achieved by cleaning up existing processes or by reducing consumption of resources where such consumption creates pollution. III.1.1. Insulation The impact of the improvement of insulation reductions is counted by billions of pounds annually. Ref table (Fig06: Potential sources of EU CO2 emission reductions ) Nanoscale materials hold great promise as insulators because of their extremely high surface-to-volume ratio. This gives them the ability to trap still air within a material layer of minimal thickness (conventional insulating materials like fibreglass and polystyrene get their high insulating value less from the conductive properties of the materials themselves than from their ability to trap still air.) Insulating a nonmaterial may be sandwiched between rigid panels, applied as thin films, or painted on as coatings (Dr. George, 2007) Nanogel panels; Aerogel This material as an incredible ability and capacity such as strength, it can take its own load 2000 times reminding that it has only 5 percent solid and the rest is filled with air only an are also applicable on fabric architecture or structures. Because nanoporous aerogels can be sensitive to moisture, they are often marketed sandwiched between wall panels that repel moisture. Aerogel panels are available with up to 75 percent translucency, and their high air content means that a 9cm (3.5) thick aerogel panel can offer an R-value of R-28, a valu